diff --git a/CVE-2025-40909.patch b/CVE-2025-40909.patch new file mode 100644 index 0000000000000000000000000000000000000000..05c7509a4fa6163fd3bef8aede8e908f461be645 --- /dev/null +++ b/CVE-2025-40909.patch @@ -0,0 +1,408 @@ +From 918bfff86ca8d6d4e4ec5b30994451e0bd74aba9 Mon Sep 17 00:00:00 2001 +From: Leon Timmermans +Date: Fri, 23 May 2025 15:40:41 +0200 +Subject: [PATCH] CVE-2025-40909: Clone dirhandles without fchdir + +This uses fdopendir and dup to dirhandles. This means it won't change +working directory during thread cloning, which prevents race conditions +that can happen if a third thread is active at the same time. +--- + Configure | 6 ++ + Cross/config.sh-arm-linux | 1 + + Cross/config.sh-arm-linux-n770 | 1 + + Porting/Glossary | 5 ++ + Porting/config.sh | 1 + + config_h.SH | 6 ++ + configure.com | 1 + + plan9/config_sh.sample | 1 + + sv.c | 91 +---------------------------- + t/op/threads-dirh.t | 104 +-------------------------------- + win32/config.gc | 1 + + win32/config.vc | 1 + + 12 files changed, 28 insertions(+), 191 deletions(-) + +diff --git a/Configure b/Configure +index 44c12ced4014..7a13249caa96 100755 +--- a/Configure ++++ b/Configure +@@ -477,6 +477,7 @@ d_fd_set='' + d_fds_bits='' + d_fdclose='' + d_fdim='' ++d_fdopendir='' + d_fegetround='' + d_ffs='' + d_ffsl='' +@@ -13314,6 +13315,10 @@ esac + set i_fcntl + eval $setvar + ++: see if fdopendir exists ++set fdopendir d_fdopendir ++eval $inlibc ++ + : see if fork exists + set fork d_fork + eval $inlibc +@@ -24665,6 +24670,7 @@ d_flockproto='$d_flockproto' + d_fma='$d_fma' + d_fmax='$d_fmax' + d_fmin='$d_fmin' ++d_fdopendir='$d_fdopendir' + d_fork='$d_fork' + d_fp_class='$d_fp_class' + d_fp_classify='$d_fp_classify' +diff --git a/Cross/config.sh-arm-linux b/Cross/config.sh-arm-linux +index bfa0b00d5f0f..9e056539198b 100644 +--- a/Cross/config.sh-arm-linux ++++ b/Cross/config.sh-arm-linux +@@ -211,6 +211,7 @@ d_fd_macros='define' + d_fd_set='define' + d_fdclose='undef' + d_fdim='undef' ++d_fdopendir=undef + d_fds_bits='undef' + d_fegetround='define' + d_ffs='undef' +diff --git a/Cross/config.sh-arm-linux-n770 b/Cross/config.sh-arm-linux-n770 +index 47ad5c37e3fd..365e4c4f9671 100644 +--- a/Cross/config.sh-arm-linux-n770 ++++ b/Cross/config.sh-arm-linux-n770 +@@ -210,6 +210,7 @@ d_fd_macros='define' + d_fd_set='define' + d_fdclose='undef' + d_fdim='undef' ++d_fdopendir=undef + d_fds_bits='undef' + d_fegetround='define' + d_ffs='undef' +diff --git a/Porting/Glossary b/Porting/Glossary +index bb505c653b0b..8b2965ca99c6 100644 +--- a/Porting/Glossary ++++ b/Porting/Glossary +@@ -943,6 +943,11 @@ d_fmin (d_fmin.U): + This variable conditionally defines the HAS_FMIN symbol, which + indicates to the C program that the fmin() routine is available. + ++d_fdopendir (d_fdopendir.U): ++ This variable conditionally defines the HAS_FORK symbol, which ++ indicates that the fdopen routine is available to open a ++ directory descriptor. ++ + d_fork (d_fork.U): + This variable conditionally defines the HAS_FORK symbol, which + indicates to the C program that the fork() routine is available. +diff --git a/Porting/config.sh b/Porting/config.sh +index a921f7e1c79a..6231ea0f31ea 100644 +--- a/Porting/config.sh ++++ b/Porting/config.sh +@@ -227,6 +227,7 @@ d_fd_macros='define' + d_fd_set='define' + d_fdclose='undef' + d_fdim='define' ++d_fdopendir='define' + d_fds_bits='define' + d_fegetround='define' + d_ffs='undef' +diff --git a/config_h.SH b/config_h.SH +index da0f2dbcd7b7..5a0f81cf2011 100755 +--- a/config_h.SH ++++ b/config_h.SH +@@ -142,6 +142,12 @@ sed <$CONFIG_H -e 's!^#undef\(.*/\)\*!/\*#define\1 \*!' -e 's!^#un + */ + #$d_fcntl HAS_FCNTL /**/ + ++/* HAS_FDOPENDIR: ++ * This symbol, if defined, indicates that the fdopen routine is ++ * available to open a directory descriptor. ++ */ ++#$d_fdopendir HAS_FDOPENDIR /**/ ++ + /* HAS_FGETPOS: + * This symbol, if defined, indicates that the fgetpos routine is + * available to get the file position indicator, similar to ftell(). +diff --git a/configure.com b/configure.com +index 99527c180bfc..7c38711bb85d 100644 +--- a/configure.com ++++ b/configure.com +@@ -6211,6 +6211,7 @@ $ WC "d_fd_set='" + d_fd_set + "'" + $ WC "d_fd_macros='define'" + $ WC "d_fdclose='undef'" + $ WC "d_fdim='" + d_fdim + "'" ++$ WC "d_fdopendir='undef'" + $ WC "d_fds_bits='define'" + $ WC "d_fegetround='undef'" + $ WC "d_ffs='undef'" +diff --git a/plan9/config_sh.sample b/plan9/config_sh.sample +index 636acbdf6db3..246bad954424 100644 +--- a/plan9/config_sh.sample ++++ b/plan9/config_sh.sample +@@ -211,6 +211,7 @@ d_fd_macros='undef' + d_fd_set='undef' + d_fdclose='undef' + d_fdim='undef' ++d_fdopendir=undef + d_fds_bits='undef' + d_fegetround='undef' + d_ffs='undef' +diff --git a/sv.c b/sv.c +index ae6d09dea28a..8a005b2d165b 100644 +--- a/sv.c ++++ b/sv.c +@@ -13690,15 +13690,6 @@ Perl_dirp_dup(pTHX_ DIR *const dp, CLONE_PARAMS *const param) + { + DIR *ret; + +-#if defined(HAS_FCHDIR) && defined(HAS_TELLDIR) && defined(HAS_SEEKDIR) +- DIR *pwd; +- const Direntry_t *dirent; +- char smallbuf[256]; /* XXX MAXPATHLEN, surely? */ +- char *name = NULL; +- STRLEN len = 0; +- long pos; +-#endif +- + PERL_UNUSED_CONTEXT; + PERL_ARGS_ASSERT_DIRP_DUP; + +@@ -13710,89 +13701,13 @@ Perl_dirp_dup(pTHX_ DIR *const dp, CLONE_PARAMS *const param) + if (ret) + return ret; + +-#if defined(HAS_FCHDIR) && defined(HAS_TELLDIR) && defined(HAS_SEEKDIR) ++#ifdef HAS_FDOPENDIR + + PERL_UNUSED_ARG(param); + +- /* create anew */ +- +- /* open the current directory (so we can switch back) */ +- if (!(pwd = PerlDir_open("."))) return (DIR *)NULL; +- +- /* chdir to our dir handle and open the present working directory */ +- if (fchdir(my_dirfd(dp)) < 0 || !(ret = PerlDir_open("."))) { +- PerlDir_close(pwd); +- return (DIR *)NULL; +- } +- /* Now we should have two dir handles pointing to the same dir. */ +- +- /* Be nice to the calling code and chdir back to where we were. */ +- /* XXX If this fails, then what? */ +- PERL_UNUSED_RESULT(fchdir(my_dirfd(pwd))); ++ ret = fdopendir(dup(my_dirfd(dp))); + +- /* We have no need of the pwd handle any more. */ +- PerlDir_close(pwd); +- +-#ifdef DIRNAMLEN +-# define d_namlen(d) (d)->d_namlen +-#else +-# define d_namlen(d) strlen((d)->d_name) +-#endif +- /* Iterate once through dp, to get the file name at the current posi- +- tion. Then step back. */ +- pos = PerlDir_tell(dp); +- if ((dirent = PerlDir_read(dp))) { +- len = d_namlen(dirent); +- if (len > sizeof(dirent->d_name) && sizeof(dirent->d_name) > PTRSIZE) { +- /* If the len is somehow magically longer than the +- * maximum length of the directory entry, even though +- * we could fit it in a buffer, we could not copy it +- * from the dirent. Bail out. */ +- PerlDir_close(ret); +- return (DIR*)NULL; +- } +- if (len <= sizeof smallbuf) name = smallbuf; +- else Newx(name, len, char); +- Move(dirent->d_name, name, len, char); +- } +- PerlDir_seek(dp, pos); +- +- /* Iterate through the new dir handle, till we find a file with the +- right name. */ +- if (!dirent) /* just before the end */ +- for(;;) { +- pos = PerlDir_tell(ret); +- if (PerlDir_read(ret)) continue; /* not there yet */ +- PerlDir_seek(ret, pos); /* step back */ +- break; +- } +- else { +- const long pos0 = PerlDir_tell(ret); +- for(;;) { +- pos = PerlDir_tell(ret); +- if ((dirent = PerlDir_read(ret))) { +- if (len == (STRLEN)d_namlen(dirent) +- && memEQ(name, dirent->d_name, len)) { +- /* found it */ +- PerlDir_seek(ret, pos); /* step back */ +- break; +- } +- /* else we are not there yet; keep iterating */ +- } +- else { /* This is not meant to happen. The best we can do is +- reset the iterator to the beginning. */ +- PerlDir_seek(ret, pos0); +- break; +- } +- } +- } +-#undef d_namlen +- +- if (name && name != smallbuf) +- Safefree(name); +-#endif +- +-#ifdef WIN32 ++#elif defined(WIN32) + ret = win32_dirp_dup(dp, param); + #endif + +diff --git a/t/op/threads-dirh.t b/t/op/threads-dirh.t +index bb4bcfc14184..14c399ca19cd 100644 +--- a/t/op/threads-dirh.t ++++ b/t/op/threads-dirh.t +@@ -13,16 +13,12 @@ BEGIN { + skip_all_if_miniperl("no dynamic loading on miniperl, no threads"); + skip_all("runs out of memory on some EBCDIC") if $ENV{PERL_SKIP_BIG_MEM_TESTS}; + +- plan(6); ++ plan(1); + } + + use strict; + use warnings; + use threads; +-use threads::shared; +-use File::Path; +-use File::Spec::Functions qw 'updir catdir'; +-use Cwd 'getcwd'; + + # Basic sanity check: make sure this does not crash + fresh_perl_is <<'# this is no comment', 'ok', {}, 'crash when duping dirh'; +@@ -31,101 +27,3 @@ fresh_perl_is <<'# this is no comment', 'ok', {}, 'crash when duping dirh'; + async{}->join for 1..2; + print "ok"; + # this is no comment +- +-my $dir; +-SKIP: { +- skip "telldir or seekdir not defined on this platform", 5 +- if !$Config::Config{d_telldir} || !$Config::Config{d_seekdir}; +- my $skip = sub { +- chdir($dir); +- chdir updir; +- skip $_[0], 5 +- }; +- +- if(!$Config::Config{d_fchdir} && $^O ne "MSWin32") { +- $::TODO = 'dir handle cloning currently requires fchdir on non-Windows platforms'; +- } +- +- my @w :shared; # warnings accumulator +- local $SIG{__WARN__} = sub { push @w, $_[0] }; +- +- $dir = catdir getcwd(), "thrext$$" . int rand() * 100000; +- +- rmtree($dir) if -d $dir; +- mkdir($dir); +- +- # Create a dir structure like this: +- # $dir +- # | +- # `- toberead +- # | +- # +---- thrit +- # | +- # +---- rile +- # | +- # `---- zor +- +- chdir($dir); +- mkdir 'toberead'; +- chdir 'toberead'; +- {open my $fh, ">thrit" or &$skip("Cannot create file thrit")} +- {open my $fh, ">rile" or &$skip("Cannot create file rile")} +- {open my $fh, ">zor" or &$skip("Cannot create file zor")} +- chdir updir; +- +- # Then test that dir iterators are cloned correctly. +- +- opendir my $toberead, 'toberead'; +- my $start_pos = telldir $toberead; +- my @first_2 = (scalar readdir $toberead, scalar readdir $toberead); +- my @from_thread = @{; async { [readdir $toberead ] } ->join }; +- my @from_main = readdir $toberead; +- is join('-', sort @from_thread), join('-', sort @from_main), +- 'dir iterator is copied from one thread to another'; +- like +- join('-', "", sort(@first_2, @from_thread), ""), +- qr/(?join, 'undef', +- 'cloned dir iterator that points to the end of the directory' +- ; +- } +- +- # Make sure the cloning code can handle file names longer than 255 chars +- SKIP: { +- chdir 'toberead'; +- open my $fh, +- ">floccipaucinihilopilification-" +- . "pneumonoultramicroscopicsilicovolcanoconiosis-" +- . "lopadotemachoselachogaleokranioleipsanodrimypotrimmatosilphiokarabo" +- . "melitokatakechymenokichlepikossyphophattoperisteralektryonoptokephal" +- . "liokinklopeleiolagoiosiraiobaphetraganopterygon" +- or +- chdir updir, +- skip("OS does not support long file names (and I mean *long*)", 1); +- chdir updir; +- opendir my $dirh, "toberead"; +- my $test_name +- = "dir iterators can be cloned when the next fn > 255 chars"; +- while() { +- my $pos = telldir $dirh; +- my $fn = readdir($dirh); +- if(!defined $fn) { fail($test_name); last SKIP; } +- if($fn =~ 'lagoio') { +- seekdir $dirh, $pos; +- last; +- } +- } +- is length async { scalar readdir $dirh } ->join, 258, $test_name; +- } +- +- is scalar @w, 0, 'no warnings during all that' or diag @w; +- chdir updir; +-} +-rmtree($dir); +diff --git a/win32/config.gc b/win32/config.gc +index f8776188c09c..34aa8de6ed75 100644 +--- a/win32/config.gc ++++ b/win32/config.gc +@@ -198,6 +198,7 @@ d_fd_macros='define' + d_fd_set='define' + d_fdclose='undef' + d_fdim='undef' ++d_fdopendir='undef' + d_fds_bits='define' + d_fegetround='undef' + d_ffs='undef' +diff --git a/win32/config.vc b/win32/config.vc +index 619979e22b53..536085fe94e0 100644 +--- a/win32/config.vc ++++ b/win32/config.vc +@@ -198,6 +198,7 @@ d_fd_macros='define' + d_fd_set='define' + d_fdclose='undef' + d_fdim='undef' ++d_fdopendir='undef' + d_fds_bits='define' + d_fegetround='undef' + d_ffs='undef' diff --git a/perl.spec b/perl.spec index cccf0cfbccbdc30a042da5d9036e1612e0c73c15..a3e6420c7255e31601a65792a9826a10ddfe213d 100644 --- a/perl.spec +++ b/perl.spec @@ -1,5 +1,5 @@ # anolis_release number must be even higher, because dual-lived modules will be broken otherwise -%define anolis_release 17 +%define anolis_release 18 %global perl_version 5.36.3 %global perl_epoch 4 @@ -68,6 +68,8 @@ Patch202: perl-5.36.0-Add-definition-of-OPTIMIZE-to-.ph-files.patch Patch203: perl-5.36.3-add-Perl_my_strlcat-and-Perl_my_strlcpy-symbol.patch # From https://kkgithub.com/Perl/perl5/commit/87f42aa0e0096e9a346c9672aa3a0bd3bef8c1dd Patch204: 1000-CVE-2024-56406.patch +# https://github.com/Perl/perl5/commit/918bfff86ca8d6d4e4ec5b30994451e0bd74aba9 +Patch205: CVE-2025-40909.patch BuildRequires: bash bzip2-devel coreutils findutils gcc glibc-common make BuildRequires: sed tar zlib-devel BuildRequires: gcc @@ -2048,6 +2050,8 @@ sed \ %if %{with test} %{new_perl} -I/lib regen/lib_cleanup.pl %{new_perl} -Ilib Porting/makemeta +%{new_perl} -Ilib Porting/checkcfgvar.pl --regen --default=undef +%{new_perl} -Ilib regen/uconfig_h.pl pushd t %{new_perl} -I../lib porting/customized.t --regen popd @@ -2583,6 +2587,9 @@ LC_ALL=C TEST_JOBS=$JOBS make test_harness %{_mandir}/man3/vmsish.* %changelog +* Tue Aug 05 2025 wenxin - 5.36.3-18 +- Add patch to fix CVE-2025-40909 + * Mon Jun 24 2025 lzq11122 - 5.36.3-17 - add patch to fix CVE-2024-56406