diff --git a/mcp_center/LICENSE b/mcp_center/LICENSE
new file mode 100644
index 0000000000000000000000000000000000000000..f6c26977bbb993b180afd759658dcf5ea6619cd0
--- /dev/null
+++ b/mcp_center/LICENSE
@@ -0,0 +1,194 @@
+木兰宽松许可证，第2版
+
+木兰宽松许可证，第2版
+
+2020年1月 http://license.coscl.org.cn/MulanPSL2
+
+您对“软件”的复制、使用、修改及分发受木兰宽松许可证，第2版（“本许可证”）的如下条款的约束：
+
+0. 定义
+
+“软件” 是指由“贡献”构成的许可在“本许可证”下的程序和相关文档的集合。
+
+“贡献” 是指由任一“贡献者”许可在“本许可证”下的受版权法保护的作品。
+
+“贡献者” 是指将受版权法保护的作品许可在“本许可证”下的自然人或“法人实体”。
+
+“法人实体” 是指提交贡献的机构及其“关联实体”。
+
+“关联实体” 是指，对“本许可证”下的行为方而言，控制、受控制或与其共同受控制的机构，此处的控制是
+指有受控方或共同受控方至少50%直接或间接的投票权、资金或其他有价证券。
+
+1. 授予版权许可
+
+每个“贡献者”根据“本许可证”授予您永久性的、全球性的、免费的、非独占的、不可撤销的版权许可，您可
+以复制、使用、修改、分发其“贡献”，不论修改与否。
+
+2. 授予专利许可
+
+每个“贡献者”根据“本许可证”授予您永久性的、全球性的、免费的、非独占的、不可撤销的（根据本条规定
+撤销除外）专利许可，供您制造、委托制造、使用、许诺销售、销售、进口其“贡献”或以其他方式转移其“贡
+献”。前述专利许可仅限于“贡献者”现在或将来拥有或控制的其“贡献”本身或其“贡献”与许可“贡献”时的“软
+件”结合而将必然会侵犯的专利权利要求，不包括对“贡献”的修改或包含“贡献”的其他结合。如果您或您的“
+关联实体”直接或间接地，就“软件”或其中的“贡献”对任何人发起专利侵权诉讼（包括反诉或交叉诉讼）或
+其他专利维权行动，指控其侵犯专利权，则“本许可证”授予您对“软件”的专利许可自您提起诉讼或发起维权
+行动之日终止。
+
+3. 无商标许可
+
+“本许可证”不提供对“贡献者”的商品名称、商标、服务标志或产品名称的商标许可，但您为满足第4条规定
+的声明义务而必须使用除外。
+
+4. 分发限制
+
+您可以在任何媒介中将“软件”以源程序形式或可执行形式重新分发，不论修改与否，但您必须向接收者提供“
+本许可证”的副本，并保留“软件”中的版权、商标、专利及免责声明。
+
+5. 免责声明与责任限制
+
+“软件”及其中的“贡献”在提供时不带任何明示或默示的担保。在任何情况下，“贡献者”或版权所有者不对
+任何人因使用“软件”或其中的“贡献”而引发的任何直接或间接损失承担责任，不论因何种原因导致或者基于
+何种法律理论，即使其曾被建议有此种损失的可能性。
+
+6. 语言
+
+“本许可证”以中英文双语表述，中英文版本具有同等法律效力。如果中英文版本存在任何冲突不一致，以中文
+版为准。
+
+条款结束
+
+如何将木兰宽松许可证，第2版，应用到您的软件
+
+如果您希望将木兰宽松许可证，第2版，应用到您的新软件，为了方便接收者查阅，建议您完成如下三步：
+
+1， 请您补充如下声明中的空白，包括软件名、软件的首次发表年份以及您作为版权人的名字；
+
+2， 请您在软件包的一级目录下创建以“LICENSE”为名的文件，将整个许可证文本放入该文件中；
+
+3， 请将如下声明文本放入每个源文件的头部注释中。
+
+Copyright (c) [Year] [name of copyright holder]
+[Software Name] is licensed under Mulan PSL v2.
+You can use this software according to the terms and conditions of the Mulan
+PSL v2.
+You may obtain a copy of Mulan PSL v2 at:
+ http://license.coscl.org.cn/MulanPSL2
+THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY
+KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
+NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+See the Mulan PSL v2 for more details.
+
+Mulan Permissive Software License，Version 2
+
+Mulan Permissive Software License，Version 2 (Mulan PSL v2)
+
+January 2020 http://license.coscl.org.cn/MulanPSL2
+
+Your reproduction, use, modification and distribution of the Software shall
+be subject to Mulan PSL v2 (this License) with the following terms and
+conditions:
+
+0. Definition
+
+Software means the program and related documents which are licensed under
+this License and comprise all Contribution(s).
+
+Contribution means the copyrightable work licensed by a particular
+Contributor under this License.
+
+Contributor means the Individual or Legal Entity who licenses its
+copyrightable work under this License.
+
+Legal Entity means the entity making a Contribution and all its
+Affiliates.
+
+Affiliates means entities that control, are controlled by, or are under
+common control with the acting entity under this License, ‘control’ means
+direct or indirect ownership of at least fifty percent (50%) of the voting
+power, capital or other securities of controlled or commonly controlled
+entity.
+
+1. Grant of Copyright License
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to you a perpetual, worldwide, royalty-free, non-exclusive,
+irrevocable copyright license to reproduce, use, modify, or distribute its
+Contribution, with modification or not.
+
+2. Grant of Patent License
+
+Subject to the terms and conditions of this License, each Contributor hereby
+grants to you a perpetual, worldwide, royalty-free, non-exclusive,
+irrevocable (except for revocation under this Section) patent license to
+make, have made, use, offer for sale, sell, import or otherwise transfer its
+Contribution, where such patent license is only limited to the patent claims
+owned or controlled by such Contributor now or in future which will be
+necessarily infringed by its Contribution alone, or by combination of the
+Contribution with the Software to which the Contribution was contributed.
+The patent license shall not apply to any modification of the Contribution,
+and any other combination which includes the Contribution. If you or your
+Affiliates directly or indirectly institute patent litigation (including a
+cross claim or counterclaim in a litigation) or other patent enforcement
+activities against any individual or entity by alleging that the Software or
+any Contribution in it infringes patents, then any patent license granted to
+you under this License for the Software shall terminate as of the date such
+litigation or activity is filed or taken.
+
+3. No Trademark License
+
+No trademark license is granted to use the trade names, trademarks, service
+marks, or product names of Contributor, except as required to fulfill notice
+requirements in section 4.
+
+4. Distribution Restriction
+
+You may distribute the Software in any medium with or without modification,
+whether in source or executable forms, provided that you provide recipients
+with a copy of this License and retain copyright, patent, trademark and
+disclaimer statements in the Software.
+
+5. Disclaimer of Warranty and Limitation of Liability
+
+THE SOFTWARE AND CONTRIBUTION IN IT ARE PROVIDED WITHOUT WARRANTIES OF ANY
+KIND, EITHER EXPRESS OR IMPLIED. IN NO EVENT SHALL ANY CONTRIBUTOR OR
+COPYRIGHT HOLDER BE LIABLE TO YOU FOR ANY DAMAGES, INCLUDING, BUT NOT
+LIMITED TO ANY DIRECT, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
+FROM YOUR USE OR INABILITY TO USE THE SOFTWARE OR THE CONTRIBUTION IN IT, NO
+MATTER HOW IT’S CAUSED OR BASED ON WHICH LEGAL THEORY, EVEN IF ADVISED OF
+THE POSSIBILITY OF SUCH DAMAGES.
+
+6. Language
+
+THIS LICENSE IS WRITTEN IN BOTH CHINESE AND ENGLISH, AND THE CHINESE VERSION
+AND ENGLISH VERSION SHALL HAVE THE SAME LEGAL EFFECT. IN THE CASE OF
+DIVERGENCE BETWEEN THE CHINESE AND ENGLISH VERSIONS, THE CHINESE VERSION
+SHALL PREVAIL.
+
+END OF THE TERMS AND CONDITIONS
+
+How to Apply the Mulan Permissive Software License，Version 2
+(Mulan PSL v2) to Your Software
+
+To apply the Mulan PSL v2 to your work, for easy identification by
+recipients, you are suggested to complete following three steps:
+
+i. Fill in the blanks in following statement, including insert your software
+name, the year of the first publication of your software, and your name
+identified as the copyright owner;
+
+ii. Create a file named "LICENSE" which contains the whole context of this
+License in the first directory of your software package;
+
+iii. Attach the statement to the appropriate annotated syntax at the
+beginning of each source file.
+
+Copyright (c) [Year] [name of copyright holder]
+[Software Name] is licensed under Mulan PSL v2.
+You can use this software according to the terms and conditions of the Mulan
+PSL v2.
+You may obtain a copy of Mulan PSL v2 at:
+ http://license.coscl.org.cn/MulanPSL2
+THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OF ANY
+KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO
+NON-INFRINGEMENT, MERCHANTABILITY OR FIT FOR A PARTICULAR PURPOSE.
+See the Mulan PSL v2 for more details.
diff --git a/mcp_center/README.en.md b/mcp_center/README.en.md
new file mode 100644
index 0000000000000000000000000000000000000000..d7eac625613c2048823d7c546c4ff9c72ab27fd3
--- /dev/null
+++ b/mcp_center/README.en.md
@@ -0,0 +1,507 @@
+# mcp_center
+
+## 1. Introduction
+mcp_center is used to build the oe intelligent assistant, and its directory structure is as follows:
+```
+├── client - Test client
+├── config - Public and private configuration files
+├── mcp_config - Configuration files for mcp registration to the framework
+├── README.en.md - English version description
+├── README.md - Chinese version description
+├── requiremenets.txt - Overall dependencies
+├── run.sh - Script to start the mcp service
+├── servers - Directory containing mcp server source code
+└── service - Directory containing .service files for mcp
+```
+
+### Running Instructions
+1. Before running the mcp server, execute the following command in the mcp_center directory:
+ ```
+ export PYTHONPATH=$(pwd)
+ ```
+2. Start the mcp server through Python for testing
+3. You can test each mcp tool through client.py in the client directory. The specific URL, tool name, and input parameters can be adjusted as needed.
+
+
+## 2. Rules for Adding New mcp
+1. **Create Service Source Code Directory**
+ Create a new folder under the `mcp_center/servers` directory. Example (taking top mcp as an example):
+ ```
+ servers/top/
+ ├── README.en.md English version of mcp service details
+ ├── README.md Chinese version of mcp service details
+ ├── requirements.txt Contains only private installation dependencies (to avoid conflicts with public dependencies)
+ └── src Source code directory (including server main entry)
+ └── server.py
+ ```
+
+2. **Configuration File Settings**
+ Create a new configuration file under the `mcp_center/config/private` directory. Example (taking top mcp as an example):
+ ```
+ config/private/top
+ ├── config_loader.py Configuration loader (including public configuration and private custom configuration)
+ └── config.toml Private custom configuration
+ ```
+
+3. **Document Updates**
+ For each new mcp added, you need to synchronously add the basic information of the mcp to the existing mcp section in the main directory's README (ensure that ports do not conflict, starting from 12100).
+ For each new mcp added, you need to add a .service file in the service directory of the main directory to make the mcp a service.
+ For each new mcp added, you need to create a corresponding directory in mcp_config of the main directory and create a config.json under it (for registering the mcp to the framework).
+ For each new mcp added, you need to add a command in run.sh of the main directory to start the mcp service.
+
+4. **General Parameter Requirements**
+ Each mcp tool requires a host as an input parameter for communication with the remote server.
+
+5. **Remote Command Execution**
+ Remote command execution can be implemented through `paramiko`.
+
+
+## 3. Existing MCP Services
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/remote_info |
+| Directory| mcp_center/servers/remote_info |
+| Port Used| 12100 |
+| Introduction | Obtain endpoint information |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/shell_generator |
+| Directory| mcp_center/servers/shell_generator |
+| Port Used| 12101 |
+| Introduction | Generate & execute shell commands |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/top |
+| Directory| mcp_center/servers/top |
+| Port Used| 12110 |
+| Introduction | Get system load info |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/kill |
+| Directory| mcp_center/servers/kill |
+| Port Used| 12111 |
+| Introduction | Process control & signal meanings |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/nohup |
+| Directory| mcp_center/servers/nohup |
+| Port Used| 12112 |
+| Introduction | Background process execution |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/strace |
+| Directory| mcp_center/servers/strace |
+| Port Used| 12113 |
+| Introduction | Process tracing for anomaly analysis |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/nvidia |
+| Directory| mcp_center/servers/nvidia |
+| Port Used| 12114 |
+| Introduction | mcp_center/servers/nvidia |
+
+| Category | Details |
+|------------|------------------------------|
+| Name | servers/npu |
+| Directory | mcp_center/servers/npu |
+| Port Used | 12115 |
+| Description| Query and control of NPU |
+
+| Category | Details |
+|------------|--------------------------|
+| Name | servers/iftop |
+| Directory | mcp_center/servers/iftop |
+| Port Used | 12116 |
+| Description| Network traffic monitoring |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/nload |
+| Directory| mcp_center/servers/nload |
+| Port Used| 12117 |
+| Introduction | Nload Bandwidth Monitoring |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/netstat |
+| Directory| mcp_center/servers/netstat |
+| Port Used| 12118 |
+| Introduction | netstat Network Connection Monitoring |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/lsof |
+| Directory| mcp_center/servers/lsof |
+| Port Used| 12119 |
+| Introduction | Quickly troubleshoot file occupation conflicts, abnormal network connections and process resource occupation issues |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/ifconfig |
+| Directory| mcp_center/servers/ifconfig |
+| Port Used| 12120 |
+| Introduction | ifconfig Network Interface Information Monitoring |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/ethtool |
+| Directory| mcp_center/servers/ethtool |
+| Port Used| 12121 |
+| Introduction | ethtool Network Card Information Query, Feature Status and Network Card Settings |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/tshark |
+| Directory| mcp_center/servers/tshark |
+| Port Used| 12122 |
+| Introduction | Capture, Display and Analyze Network Traffic |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/file_content_tool |
+| Directory| mcp_center/servers/file_content_tool |
+| Port Used| 12125 |
+| Introduction | File Content Creation, Deletion, Modification and Query |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/firewalld |
+| Directory| mcp_center/servers/firewalld |
+| Port Used| 12130 |
+| Introduction | Firewalld Network Firewall Management Tool |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/iptable |
+| Directory| mcp_center/servers/iptable |
+| Port Used| 12131 |
+| Introduction | iptables Firewall Management Tool |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/docker |
+| Directory| mcp_center/servers/docker |
+| Port Used| 12133 |
+| Introduction | docker Tool |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/qemu |
+| Directory| mcp_center/servers/qemu |
+| Port Used| 12134 |
+| Introduction | Qemu Virtual Machine Management Tool |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/nmap |
+| Directory| mcp_center/servers/nmap |
+| Port Used| 12135 |
+| Introduction | Nmap IP Scanning Tool |
+
+| Category | Details |
+|----------|-------------------------------|
+| Name | servers/file_transfer |
+| Directory| mcp_center/servers/file_transfer |
+| Port Used| 12136 |
+| Introduction | File Transfer/Download |
+
+| Category | Details |
+|----------------|--------------------------------------------------|
+| Name | servers/systrace-mcpserver |
+| Directory | mcp_center/servers/systrace/systrace_mcp |
+| Port Occupied | 12145 |
+| Description | Start MCP Server Service |
+
+| Category | Details |
+|----------------|--------------------------------------------------|
+| Name | servers/systrace-openapi |
+| Directory | mcp_center/servers/systrace/systrace_mcp |
+| Port Occupied | 12146 |
+| Description | Start OpenAPI Server Service |
+
+| Category | Details |
+|----------------|--------------------------------------------------|
+| Name | servers/systrace-mcpserver |
+| Directory | mcp_center/servers/euler-copilot-tune |
+| Port Occupied | 12147 |
+| Description | Tuning MCP Service |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/ |
+| Directory | mcp_center/servers/lscpu |
+| Port Occupied | 12202 |
+| Description | Collects static information such as CPU architecture |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_topo |
+| Directory | mcp_center/servers/numa_topo |
+| Port Occupied | 12203 |
+| Description | Queries NUMA hardware topology and system configuration |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_bind_proc |
+| Directory | mcp_center/servers/numa_bind_proc |
+| Port Occupied | 12204 |
+| Description | Binds processes to specified NUMA nodes at startup |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_rebind_proc |
+| Directory | mcp_center/servers/numa_rebind_proc |
+| Port Occupied | 12205 |
+| Description | Modifies NUMA bindings of already started processes |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_bind_docker |
+| Directory | mcp_center/servers/numa_bind_docker |
+| Port Occupied | 12206 |
+| Description | Configure NUMA binding for Docker containers |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_perf_compare |
+| Directory | mcp_center/servers/numa_perf_compare |
+| Port Occupied | 12208 |
+| Description | Control test variables with NUMA binding |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_diagnose |
+| Directory | mcp_center/servers/numa_diagnose |
+| Port Occupied | 12209 |
+| Description | Locate hardware issues with NUMA binding |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numastat |
+| Directory | mcp_center/servers/numastat |
+| Port Occupied | 12210 |
+| Description | View the overall NUMA memory access status of the system |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_cross_node |
+| Directory | mcp_center/servers/numa_cross_node |
+| Port Occupied | 12211 |
+| Description | Identify processes with excessive cross-node memory access |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/numa_container |
+| Directory | mcp_center/servers/numa_container |
+| Port Occupied | 12214 |
+| Description | Monitor NUMA memory access in Docker containers |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/hotspot_trace |
+| Directory | mcp_center/servers/hotspot_trace |
+| Port Occupied | 12216 |
+| Description | Quickly locate CPU performance bottlenecks in systems/processes |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/cache_miss_audit |
+| Directory | mcp_center/servers/cache_miss_audit |
+| Port Occupied | 12217 |
+| Description | Identify performance losses due to CPU cache misses |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/func_timing_trace |
+| Directory | mcp_center/servers/func_timing_trace |
+| Port Occupied | 12218 |
+| Description | Accurately measure function execution time (including call stack) |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/strace_syscall |
+| Directory | mcp_center/servers/strace_syscall |
+| Port Occupied | 12219 |
+| Description | Investigate unreasonable system calls (high frequency / time-consuming) |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/perf_interrupt |
+| Directory | mcp_center/servers/perf_interrupt |
+| Port Occupied | 12220 |
+| Description | Locate CPU usage caused by high-frequency interrupts |
+
+| Category | Details |
+|----------|--------------------------|
+| Name | servers/flame_graph |
+| Directory | mcp_center/servers/flame_graph |
+| Port Occupied | 12222 |
+| Description | Flame graph generation: Visualize performance bottlenecks |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/free |
+| Directory| mcp_center/servers/free |
+| Port Used| 13100 |
+| Introduction | Obtain the overall status of system memory |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/vmstat |
+| Directory| mcp_center/servers/vmstat |
+| Port Used| 13101 |
+| Introduction | Collect information on system resource interaction bottlenecks |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/sar |
+| Directory| mcp_center/servers/sar |
+| Port Used| 13102 |
+| Introduction | System resource monitoring and fault diagnosis |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/sync |
+| Directory| mcp_center/servers/sync |
+| Port Used| 13103 |
+| Introduction | Write memory buffer data to disk |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/swapon |
+| Directory| mcp_center/servers/swapon |
+| Port Used| 13104 |
+| Introduction | Check the status of swap devices |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/swapoff |
+| Directory| mcp_center/servers/swapoff |
+| Port Used| 13105 |
+| Introduction | Disable swap devices |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/fallocate |
+| Directory| mcp_center/servers/fallocate|
+| Port Used| 13106 |
+| Introduction | Temporarily create and enable swap files |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/find |
+| Directory| mcp_center/servers/find |
+| Port Used| 13107 |
+| Introduction | File Search |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/touch |
+| Directory| mcp_center/servers/touch |
+| Port Used| 13108 |
+| Introduction | File Creation and Time Calibration |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/mkdir |
+| Directory| mcp_center/servers/mkdir |
+| Port Used| 13109 |
+| Introduction | Directory Creation |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/rm |
+| Directory| mcp_center/servers/rm |
+| Port Used| 13110 |
+| Introduction | File Deletion |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/mv |
+| Directory| mcp_center/servers/mv |
+| Port Used| 13111 |
+| Introduction | File move or rename |
+
+| Category | Details |
+|----------|-----------------------------|
+| Name | servers/ls |
+| Directory| mcp_center/servers/ls |
+| Port Used| 13112 |
+| Introduction | View directory contents |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | head |
+| Directory| mcp_center/servers/head |
+| Port Used | 13113 |
+| Introduction | File beginning content viewing tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | tail |
+| Directory| mcp_center/servers/tail |
+| Port Used | 13114 |
+| Introduction | File ending content viewing tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | cat |
+| Directory| mcp_center/servers/cat |
+| Port Used | 13115 |
+| Introduction | File content viewing tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | chown |
+| Directory| mcp_center/servers/chown |
+| Port Used | 13116 |
+| Introduction | File owner modification tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | chmod |
+| Directory| mcp_center/servers/chmod |
+| Port Used | 13117 |
+| Introduction | File permission modification tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | tar |
+| Directory| mcp_center/servers/tar |
+| Port Used | 13118 |
+| Introduction | File compression and decompression tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | zip |
+| Directory| mcp_center/servers/zip |
+| Port Used | 13119 |
+| Introduction | File compression and decompression tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | grep |
+| Directory| mcp_center/servers/grep |
+| Port Used | 13120 |
+| Introduction | File content search tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | sed |
+| Directory| mcp_center/servers/sed |
+| Port Used | 13121 |
+| Introduction | Text processing tool |
+
+| Category | Details |
+|----------|--------------------------------------|
+| Name | echo |
+| Directory| mcp_center/servers/echo |
+| Port Used | 13125 |
+| Introduction | Text writing tool |
diff --git a/mcp_center/README.md b/mcp_center/README.md
new file mode 100644
index 0000000000000000000000000000000000000000..0976728442a4b9250d5dc9583f4c7e4401645f95
--- /dev/null
+++ b/mcp_center/README.md
@@ -0,0 +1,507 @@
+# mcp_center
+
+## 一、介绍
+mcp_center 用于构建 oe 智能助手，其目录结构如下：
+```
+├── client 测试用客户端
+├── config 公共和私有配置文件
+├── mcp_config mcp注册到框架的配置文件
+├── README.en.md 英文版本说明
+├── README.md 中文版本说明
+├── requiremenets.txt 整体的依赖
+├── run.sh 唤起mcp服务的脚本
+├── servers mcp server源码所在目录
+└── service mcp的.serivce文件所在目录
+```
+
+### 运行说明
+1. 运行 mcp server 前，需在 mcp_center 目录下执行：
+ ```
+ export PYTHONPATH=$(pwd)
+ ```
+2. 通过 Python 唤起 mcp server 进行测试
+3. 可通过 client 目录下的 client.py 对每个 mcp 工具进行测试，具体的 URL、工具名称和入参可自行调整
+
+
+## 二、新增 mcp 规则
+1. **创建服务源码目录**
+ 在 `mcp_center/servers` 目录下新建文件夹，示例（以 top mcp 为例）：
+ ```
+ servers/top/
+ ├── README.en.md 英文版本的 mcp 服务详情描述
+ ├── README.md 中文版本的 mcp 服务详情描述
+ ├── requirements.txt 仅包含私有安装依赖（避免与公共依赖冲突）
+ └── src 源码目录（含 server 主入口）
+ └── server.py
+ ```
+
+2. **配置文件设置**
+ 在 `mcp_center/config/private` 目录下新建配置文件，示例（以 top mcp 为例）：
+ ```
+ config/private/top
+ ├── config_loader.py 配置加载器（含公共配置和私有自定义配置）
+ └── config.toml 私有自定义配置
+ ```
+
+3. **文档更新**
+ 每新增一个 mcp，需在主目录的 README 中现有 mcp 板块同步新增该 mcp 的基本信息（确保端口不冲突，端口从 12100 开始）
+ 每新增一个 mcp，需要在主目录中的 service 中增加.service文件用于将mcp制作成服务
+ 每新增一个 mcp，需要在主目录中的 mcp_config 中新建对应名称的目录并在下面创建一个config.json（用于将mcp注册到框架）
+ 每新增一个 mcp，需要在主目录中的 run.sh 中增加一条命令用于唤起mcp服务
+4. **通用参数要求**
+ 每个 mcp 的工具都需要一个 host 作为入参，用于与远端服务器通信。
+
+5. **远程命令执行**
+ 可通过 `paramiko` 实现远程命令执行。
+
+
+## 三、现有的 MCP 服务
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/remote_info |
+| 目录 | mcp_center/servers/remote_info |
+| 占用端口 | 12100 |
+| 简介 | 获取端点信息 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/shell_generator |
+| 目录 | mcp_center/servers/shell_generator |
+| 占用端口 | 12101 |
+| 简介 | 生成&执行shell命令 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/top |
+| 目录 | mcp_center/servers/top |
+| 占用端口 | 12110 |
+| 简介 | 获取系统负载信息 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/kill |
+| 目录 | mcp_center/servers/kill |
+| 占用端口 | 12111 |
+| 简介 | 控制进程&查看进程信号量含义 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/nohup |
+| 目录 | mcp_center/servers/nohup |
+| 占用端口 | 12112 |
+| 简介 | 后台执行进程 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/strace |
+| 目录 | mcp_center/servers/strace |
+| 占用端口 | 12113 |
+| 简介 | 跟踪进程信息，可以用于异常情况分析 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/nvidia |
+| 目录 | mcp_center/servers/nvidia |
+| 占用端口 | 12114 |
+| 简介 | GPU负载信息查询 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/npu |
+| 目录 | mcp_center/servers/npu |
+| 占用端口 | 12115 |
+| 简介 | npu的查询和控制 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/iftop |
+| 目录 | mcp_center/servers/iftop |
+| 占用端口 | 12116 |
+| 简介 | 网络流量监控 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/nload |
+| 目录 | mcp_center/servers/nload |
+| 占用端口 | 12117 |
+| 简介 | Nload带宽监控 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/netstat |
+| 目录 | mcp_center/servers/netstat |
+| 占用端口 | 12118 |
+| 简介 | netstat网络连接监控 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/lsof |
+| 目录 | mcp_center/servers/lsof |
+| 占用端口 | 12119 |
+| 简介 | 快速排查文件占用冲突、网络连接异常及进程资源占用问题 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/ifconfig |
+| 目录 | mcp_center/servers/ifconfig |
+| 占用端口 | 12120 |
+| 简介 | ifconfig 网络接口信息监控 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/ethtool |
+| 目录 | mcp_center/servers/ethtool |
+| 占用端口 | 12121 |
+| 简介 | ethtool网卡信息查询，特性情况，网卡设置 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/tshark |
+| 目录 | mcp_center/servers/tshark |
+| 占用端口 | 12122 |
+| 简介 | 捕获、显示和分析网络流量 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/file_content_tool |
+| 目录 | mcp_center/servers/file_content_tool |
+| 占用端口 | 12125 |
+| 简介 | 文件内容增删改查 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/firewalld |
+| 目录 | mcp_center/servers/firewalld |
+| 占用端口 | 12130 |
+| 简介 | Firewalld网络防火墙管理工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/iptable |
+| 目录 | mcp_center/servers/iptable |
+| 占用端口 | 12131 |
+| 简介 | iptables防火墙管理工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/docker |
+| 目录 | mcp_center/servers/docker |
+| 占用端口 | 12133 |
+| 简介 | docker工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/qemu |
+| 目录 | mcp_center/servers/qemu |
+| 占用端口 | 12134 |
+| 简介 | Qemu虚拟机管理工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/nmap |
+| 目录 | mcp_center/servers/nmap |
+| 占用端口 | 12135 |
+| 简介 | Nmap扫描IP |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/file_transfer |
+| 目录 | mcp_center/servers/file_transfer |
+| 占用端口 | 12136 |
+| 简介 | 文件传输/下载 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/systrace-mcpserver |
+| 目录 | mcp_center/servers/systrace/systrace_mcp |
+| 占用端口 | 12145 |
+| 简介 | 开启MCP Server服务 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/ssystrace-openapi |
+| 目录 | mcp_center/servers/systrace/systrace_mcp |
+| 占用端口 | 12146 |
+| 简介 | 开启OpenAPI Server服务 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/systrace-mcpserver |
+| 目录 | mcp_center/servers/euler-copilot-tune |
+| 占用端口 | 12147 |
+| 简介 | 调优MCP服务 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/lscpu |
+| 目录 | mcp_center/servers/lscpu |
+| 占用端口 | 12202 |
+| 简介 | cpu架构等静态信息收集 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_topo |
+| 目录 | mcp_center/servers/numa_topo |
+| 占用端口 | 12203 |
+| 简介 | 查询 NUMA 硬件拓扑与系统配置 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_bind_proc |
+| 目录 | mcp_center/servers/numa_bind_proc |
+| 占用端口 | 12204 |
+| 简介 | 启动时绑定进程到指定 NUMA 节点 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_rebind_proc |
+| 目录 | mcp_center/servers/numa_rebind_proc |
+| 占用端口 | 12205 |
+| 简介 | 修改已启动进程的 NUMA 绑定 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_bind_docker |
+| 目录 | mcp_center/servers/numa_bind_docker |
+| 占用端口 | 12206 |
+| 简介 | 为 Docker 容器配置 NUMA 绑定 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_perf_compare |
+| 目录 | mcp_center/servers/numa_perf_compare |
+| 占用端口 | 12208 |
+| 简介 | 用 NUMA 绑定控制测试变量 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_diagnose |
+| 目录 | mcp_center/servers/numa_diagnose |
+| 占用端口 | 12209 |
+| 简介 | 用 NUMA 绑定定位硬件问题 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numastat |
+| 目录 | mcp_center/servers/numastat |
+| 占用端口 | 12210 |
+| 简介 | 查看系统整体 NUMA 内存访问状态 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_cross_node |
+| 目录 | mcp_center/servers/numa_cross_node |
+| 占用端口 | 12211 |
+| 简介 | 定位跨节点内存访问过高的进程 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/numa_container |
+| 目录 | mcp_center/servers/numa_container |
+| 占用端口 | 12214 |
+| 简介 | 监控 Docker 容器的 NUMA 内存访问 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/hotspot_trace |
+| 目录 | mcp_center/servers/hotspot_trace |
+| 占用端口 | 12216 |
+| 简介 | 快速定位系统 / 进程的 CPU 性能瓶颈 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/cache_miss_audit |
+| 目录 | mcp_center/servers/cache_miss_audit |
+| 占用端口 | 12217 |
+| 简介 | 定位 CPU 缓存失效导致的性能损耗 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/func_timing_trace |
+| 目录 | mcp_center/servers/func_timing_trace |
+| 占用端口 | 12218 |
+| 简介 | 精准测量函数执行时间（含调用栈） |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/strace_syscall |
+| 目录 | mcp_center/servers/strace_syscall |
+| 占用端口 | 12219 |
+| 简介 | 排查不合理的系统调用（高频 / 耗时） |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/perf_interrupt |
+| 目录 | mcp_center/servers/perf_interrupt |
+| 占用端口 | 12220 |
+| 简介 | 定位高频中断导致的 CPU 占用 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/flame_graph |
+| 目录 | mcp_center/servers/flame_graph |
+| 占用端口 | 12222 |
+| 简介 | 火焰图生成：可视化展示性能瓶颈 |
+
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/free |
+| 目录 | mcp_center/servers/free |
+| 占用端口 | 13100 |
+| 简介 | 获取系统内存整体状态 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/vmstat |
+| 目录 | mcp_center/servers/vmstat |
+| 占用端口 | 13101 |
+| 简介 | 系统资源交互瓶颈信息采集 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/sar |
+| 目录 | mcp_center/servers/sar |
+| 占用端口 | 13102 |
+| 简介 | 系统资源监控与故障诊断 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/sync |
+| 目录 | mcp_center/servers/sync |
+| 占用端口 | 13103 |
+| 简介 | 内存缓冲区数据写入磁盘 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/swapon |
+| 目录 | mcp_center/servers/swapon |
+| 占用端口 | 13104 |
+| 简介 | 查看swap设备状态 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/swapoff |
+| 目录 | mcp_center/servers/swapoff |
+| 占用端口 | 13105 |
+| 简介 | swap设备停用 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/fallocate |
+| 目录 | mcp_center/servers/fallocate |
+| 占用端口 | 13106 |
+| 简介 | 临时创建并启用swap文件 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/find |
+| 目录 | mcp_center/servers/find |
+| 占用端口 | 13107 |
+| 简介 | 文件查找 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/touch |
+| 目录 | mcp_center/servers/touch |
+| 占用端口 | 13108 |
+| 简介 | 文件创建与时间校准 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/mkdir |
+| 目录 | mcp_center/servers/mkdir |
+| 占用端口 | 13109 |
+| 简介 | 文件夹创建 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/rm |
+| 目录 | mcp_center/servers/rm |
+| 占用端口 | 13110 |
+| 简介 | 文件删除 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/mv |
+| 目录 | mcp_center/servers/mv |
+| 占用端口 | 13111 |
+| 简介 | 文件移动或重命名 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | servers/ls |
+| 目录 | mcp_center/servers/ls |
+| 占用端口 | 13112 |
+| 简介 | 查看目录内容 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | head |
+| 目录 | mcp_center/servers/head |
+| 占用端口 | 13113 |
+| 简介 | 文件开头内容查看工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | tail |
+| 目录 | mcp_center/servers/tail |
+| 占用端口 | 13114 |
+| 简介 | 文件末尾内容查看工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | cat |
+| 目录 | mcp_center/servers/cat |
+| 占用端口 | 13115 |
+| 简介 | 文件内容查看工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | chown |
+| 目录 | mcp_center/servers/chown |
+| 占用端口 | 13116 |
+| 简介 | 文件所有者修改工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | chmod |
+| 目录 | mcp_center/servers/chmod |
+| 占用端口 | 13117 |
+| 简介 | 文件权限修改工具 |
+
+| 类别 | 详情 |
+|--------|------------------------|
+| 名称 | tar |
+| 目录 | mcp_center/servers/tar |
+| 占用端口 | 13118 |
+| 简介 | 文件压缩解压工具 |
+
+| 类别 | 详情 |
+|--------|------------------------|
+| 名称 | zip |
+| 目录 | mcp_center/servers/zip |
+| 占用端口 | 13119 |
+| 简介 | 文件压缩解压工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | grep |
+| 目录 | mcp_center/servers/grep |
+| 占用端口 | 13120 |
+| 简介 | 文件内容搜索工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | sed |
+| 目录 | mcp_center/servers/sed |
+| 占用端口 | 13121 |
+| 简介 | 文本处理工具 |
+
+| 类别 | 详情 |
+|--------|--------------------------|
+| 名称 | echo |
+| 目录 | mcp_center/servers/echo |
+| 占用端口 | 13125 |
+| 简介 | 文本写入工具 |
\ No newline at end of file
diff --git a/mcp_center/requiremenets.txt b/mcp_center/requiremenets.txt
new file mode 100644
index 0000000000000000000000000000000000000000..f7e4ad52dc93921ad91c7744c53dfc5aa5053b15
--- /dev/null
+++ b/mcp_center/requiremenets.txt
@@ -0,0 +1,5 @@
+paramiko==4.0.0
+psutil==7.0.0
+toml == 0.10.2
+mcp == 1.9.4
+scp == 0.15.0
\ No newline at end of file
diff --git a/mcp_center/run.sh b/mcp_center/run.sh
new file mode 100755
index 0000000000000000000000000000000000000000..43b4d212bd34efea403aa247cc790fca79dd589d
--- /dev/null
+++ b/mcp_center/run.sh
@@ -0,0 +1,85 @@
+#!/bin/bash
+
+SERVICE_DIR="/usr/lib/euler-copilot-framework/mcp_center/service"
+
+for service_file in "$SERVICE_DIR"/*.service; do
+ if [ -f "$service_file" ]; then
+ service_name=$(basename "$service_file" .service)
+ systemctl enable "$service_name"
+ systemctl start "$service_name"
+ fi
+done
+
+pip install -r /usr/lib/euler-copilot-framework/mcp_center/requiremenets.txt -i https://pypi.tuna.tsinghua.edu.cn/simple
+
+SCRIPT_PATH=$(cd $(dirname $0) && pwd)
+echo "当前脚本所在目录: $SCRIPT_PATH"
+
+#源码启动systrace和euler-copilot-tune服务
+WORK_PATH="$SCRIPT_PATH/servers"
+SYSTRACE_FAILSLOW_SETUP="$WORK_PATH/systrace/failslow"
+SYSTRACE_MCP_SETUP="$WORK_PATH/systrace/systrace_mcp"
+TUNE_SETUP="$WORK_PATH/euler-copilot-tune"
+SYSTEMD_SVC1="systrace-mcpserver"
+SYSTEMD_SVC2="tune-mcpserver"
+REPO_URL="https://mirrors.huaweicloud.com/repository/pypi/simple/"
+REPO_HOST="mirrors.huaweicloud.com"
+pkill -f /usr/bin/dnf
+yum install python3-devel krb5-devel -y
+pkill -f /usr/bin/dnf
+yum install sysstat perf gcc -y
+systemctl start sysstat
+yum install sysbench -y
+
+PYTHON_VERSION=$(python3 -V 2>&1 | awk '{print $2}' | cut -d '.' -f 1,2)
+# 提取主版本（如 "3.9" → "3"）和次版本（如 "3.9" → "9"）
+PY_MAJOR=$(echo "$PYTHON_VERSION" | cut -d '.' -f 1)
+PY_MINOR=$(echo "$PYTHON_VERSION" | cut -d '.' -f 2)
+
+if [ -z "$PY_MAJOR" ] || [ -z "$PY_MINOR" ] || ! [[ "$PY_MAJOR" =~ ^[0-9]+$ ]] || ! [[ "$PY_MINOR" =~ ^[0-9]+$ ]]; then
+ echo -e "\033[31m错误：无法识别 Python 版本，当前输出为：$(python3 -V 2>&1)\033[0m"
+ exit 1
+fi
+
+echo -e "\033[34m当前系统 Python 版本：$PYTHON_VERSION\033[0m"
+if [ "$PY_MAJOR" -eq 3 ] && [ "$PY_MINOR" -eq 9 ]; then
+ echo -e "\033[32mPython 版本符合要求（3.9），无需执行 pip install mcp\033[0m"
+else
+ echo -e "\033[33mPython 版本不符合要求（需 3.9，当前为 $PYTHON_VERSION），开始执行 pip install mcp...\033[0m"
+
+ if pip install mcp -i https://pypi.tuna.tsinghua.edu.cn/simple; then
+ echo -e "\033[32mpip install mcp 执行成功！\033[0m"
+ else
+ echo -e "\033[31m错误：pip install mcp 执行失败，请检查网络或 pip 环境！\033[0m"
+ exit 1
+ fi
+fi
+
+if [ ! -d "$WORK_PATH" ]; then
+ echo -e "\033[31m错误：核心工作目录不存在！\033[0m"
+ echo -e "目标目录：$WORK_PATH"
+ echo -e "请先确认 euler-copilot-framework 已正确部署，或调整 WORK_PATH 路径后重试。"
+ exit 1
+fi
+
+pip install "$SYSTRACE_FAILSLOW_SETUP" -i $REPO_URL --trusted-host $REPO_HOST
+pip install "$SYSTRACE_MCP_SETUP" -i $REPO_URL --trusted-host $REPO_HOST
+pip install "$TUNE_SETUP" -i $REPO_URL --trusted-host $REPO_HOST
+
+cp -rf $SYSTRACE_FAILSLOW_SETUP/service/systrace-failslow.service /usr/lib/systemd/system/systrace-failslow.service
+cp -rf $SYSTRACE_MCP_SETUP/service/systrace-mcpserver.service /usr/lib/systemd/system/systrace-mcpserver.service
+mkdir -p /etc/systrace/config/
+cp -rf $SYSTRACE_MCP_SETUP/config/* /etc/systrace/config/
+cp -rf $SYSTRACE_FAILSLOW_SETUP/config/* /etc/systrace/config/
+
+cp -rf $TUNE_SETUP/service/tune-mcpserver.service /usr/lib/systemd/system/tune-mcpserver.service
+mkdir -p /etc/euler-copilot-tune
+cp -rf $TUNE_SETUP/config /etc/euler-copilot-tune/
+cp -rf $TUNE_SETUP/config/.env.yaml /etc/euler-copilot-tune/config/.env.yaml
+cp -rf $TUNE_SETUP/scripts /etc/euler-copilot-tune/
+cp -rf $TUNE_SETUP/src/knowledge_base /etc/euler-copilot-tune/
+
+
+systemctl daemon-reload
+systemctl enable --now "$SYSTEMD_SVC1"
+systemctl enable --now "$SYSTEMD_SVC2"
\ No newline at end of file